Lafarge Africa Plc is a member of the LafargeHolcim Group – the biggest building and concrete solutions company in the world. It is a publicly quoted company on the Nigerian Stock Exchange (NSE) and serves Nigeria with a wide range of building and construction solutions designed to meet housing and construction needs from small projects like individual home buildings to major construction and infrastructure projects.

We are recruiting to fill the position below:

Job Title: Electrical Engineer

Requisition ID: 4916
Location: Ewekoro, Ogun
Employment Type: Full time

Summary

• Improvement of the reliability factor of plant electrical equipment and supply the electrical energy required by the company with the highest level of safety, quality and effectiveness at minimum cost to maximise equipment availability.
• Apply preventive and predictive maintenance practices, and contribute to their improvement.

Responsibilities 

• Supervise and inspect the installation, modification, testing and operation of plant electrical  systems and equipment
• Investigate electrical failures, document and communicate RCFA findings
• Analyze the results performance of electrical maintenance (time spent to perform the jobs, frequency of the job, spares and consumables utilized during the job in order to propose ways for optimizing efficiency.
• Control the isolation procedure and safety points during plant isolation and other activities in the sub-station using the LOTOTO work instruction
• Troubleshoot, maintain and repair plant electrical & control systems and other related devices
• Develop maintenance and standard operating procedure for electrical systems and equipment
• Come up with design if required to modify or upgrade electrical equipment for improvement
• Start-up or shutdown the plant from the main substation and communicate with system power plant operators to coordinate transmission loads, frequency and line voltages.
• Operate plant emergency generator to provide power for lighting and air-conditioning systems in the plant in the event of total power outage
• Read and interpret Electrical drawings, manuals, codes and specifications to determine layout of plant equipment installations, write procedure or troubleshoot equipment failure.
• Install, inspect, replace or repair electrical wiring, switch boxes, feeders, lighting fixtures and other electrical components
• Test electrical equipment and components for continuity, current, voltage and resistance using Multi-meter, Insulation resistance tester or PDMA machine
• Maintain, repair, install and test breakers, switchgears, transformers and their accessories.
• Maintain, repair, test and install electrical motors, Substation UPS & their batteries, and pneumatic electrical control systems
• To control the execution of electrical interventions defined on the work orders and maintenance schedule and update all maintenance records
• Defining specification for purchasing of spares parts and appraising the quality of spares and suppliers
• Prepare material cost, timing estimates, reports and design specifications for electrical systems and equipment
• Prepare job scope, contract documents and evaluate tenders for maintenance with procurement team.
• Guides, train subordinates (Technicians & Craftsmen) in electrical activities, control the efficiency and effectiveness of, and appraise the subordinates once a year.
• Attend daily core team meetings and give Electrical Manager feedback every morning at the departmental meetings.
• Control the switching of power on Medium & Low voltage switchgears in respective MCC’s and ensures distribution of power downstream in respective shops, estates and buildings.
• Analyze and record instrument readings and equipment malfunctions and also observe relevant information for all actions involving switchgear and switchboard.
• Monitor and carry out work by inspection (WBI) and send daily report for plant equipment, switch gears, pumps, compressors, valves, gauges, alarms, meters and other instruments to measure temperature, flow, or other equipment malfunctions and to ensure plant equipment is operating at maximum efficiency.
• Carry out periodic calibration, Validation of instruments as per schedule or as required to enhance equipment performance and document results.
• Troubleshoot and perform corrective action and minor repairs to prevent equipment or system failure
• Carry out assessment of the section to ensure safety and clean conditions of the areas during and after every intervention.

Safety:

• Ensure all transformer pens and Sub-stations are always locked
• Ensure all pull switches and cords on conveyors are tested periodically for efficient use
• Ensure all site electrical panels doors are closed always
• Ensure adequate closure of all safety related reports by subordinates.

IMS:

• Comply with EMS Electrical activities
• Ensure involvement in the implementation and maintenance of integrated management system in the plant.

Tools:

• Maintenance Management software: CMMS (SAP), ADAP, etc.
• Best practices: Maintenance inspections & job plans..
• Methods and tools for safety management.
• Root cause analysis.

Performance Criteria
Financial performance:

• Actual costs versus budgeted costs
• Technical performance:
• Reliability, especially raw mills, burning lines and cement mills, as well as equipment failure rate. (ADAP)
• Mean Time Between Failures (MTBF).

Maintenance Practices:

• Compliance to maintenance processes indicators.
• Frequency and severity rate of accidents of maintenance personnel and on-site contractors.

Resources

• The job position has direct subordinates and 4 other similar engineers as shown in the chart above.

Interfacings:
Internal:

• Electrical Manager
• Production Manager/ coordinator/ Shift leader
• Instrumentation & Automation Engineers.
• The Plant Controller – to establish budget and for cash advances, remunerations, cash claims and reimbursements.
• The Safety Manager/ Coordinator for risk assessment and all safety issues.
• Environmental Manager – for issues relating to Environmental Management System.
• Instrumentation & Automation Technicians..
• Methods department for scheduled maintenance shutdown and other jobs
• Warehouse manager for spares stock issues.

External:

• Suppliers of Electrical Equipment.
• Wartsila Power plant
• Nigerian Gas company metering station staff
• TC Experts.
• Colleagues within Lafarge Group.
• Others as may be necessary and approved by any of the Superior Managers.

Ediucation & Qualifications

•  B.Sc or equivalent in Electrical engineering/Electronics as main subjects.
• 5 years postgraduate experience.
• Good knowledge of cement manufacturing processes.
• Commitment to the highest standards of safe work habits
• Good knowledge of safety laws and regulations.
• Good written and verbal communications skills

Technical competencies:

• Strong technical knowledge of electrical maintenance operations
• Knowledge of instrumentation and control systems
• Knowledge of quality management methods
• Knowledge of cement process is desirable.
• Computer literacy.
• Knowledge in electricity and electronics.
• Local Safety rules and regulations

Behavioural competencies:

• Result driven (reliability, cost)
• Good interpersonal relationship
• Must have ability to work in a multi-cultural environment.
• Leadership in managing projects.
• Accuracy and precision
• Good aptitude for organisation and communication

Managerial Competencies:

• Team player.
• Good aptitude for organization and communication
• Anticipative.

How to Apply
Interested and qualified candidates should:
Click here to apply

Closing date: Not specified